AlarmSense Sounder Base 45681-510 Ziton Radio The type of call point

The type of call point used will depend on the type of operation (button or magnetic reset) and the system features you wish to take advantage of

the bases must be fitted to the ceiling observing the marking on the exterior which indicates the position of the LED

Supplies power to and controls a Quantec Addressable Call System

This relay is failsafe and normally energised - if power is removed from the panel the relay will changeover to produce a fault signal

to isolate the dwelling’s detectors for up to 15 minutes prior to a local alarm condition occurring

AlarmSense Sounder Base 45681-510 Ziton Radio The type of call pointAlarmSense Sounder Base 45681 510 The AlarmSense Sounder Base can only be used with AlarmSense systems. It is fitted with electronic circuitry to monitor the presence of detectors and signals any unauthorised removal of detector heads. It is supplied with a high or low volume setting and red (45681 295) or white (45681 294) caps are available for stand alone installation. Download Datasheet.